|
|
- High intensity L.E.D.: 8 L.E.D. array @ 2Hz
- Filament Bulb: 3 watt @ 1.5Hz
- Steady or blinking mode
- 7 lens colours available -
Amber, Blue, Clear, Green, Opal, Red, Yellow
- Remote switching from steady to blinking mode via input terminals on both versions
- Voltages: 12vdc; 24vdc; 48vdc; 24vac; 115vac; 230vac
- Other voltages available upon request
- Mounting via internal BESA compatible fixing positions
- Back box with mounting lugs also available
- IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
- Tropicalisation available on request
- Base enclosure material: UL94V0 & 5VA rated FR ABS
- Base colour available: Red (RAL3000), Grey or White
- Lens Material: Polycarbonate
- Operating temperature: -25 to +55°C
- Storage temperature: -40 to +70°C
- Relative humidity: 90% at 20°C
- Weight 0.20Kg
- Terminals accept 0.5 to 2.5mm2 cables
The L101L-IS unit is an intrinsically safe field mounting beacon which provides a bright flashing warning signal in a hazardous area.
The unit can be used independently or combined with an A105N-IS sounder.
When the beacon is used in conjunction with an A105N-IS sounder the alarm accept function can be utilised. By closing a pair of external contacts (i.e push switch) the operator may silence the sounder for between 1 to 30 minutes. If after the preset time the alarm condition still exists the sounder will activate again.
- L101L-IS-C: EEx ia IIC T4 (Tamb. +60°C) Zone 0,1 & 2
- Output frequency:
Alone: 2Hz (2 double flashes per second)
With A105N-IS sounder:
On: 1Hz (1 double flash per second)
Silenced: 2Hz (2 double flashes per second)
(alarm accepted)
Sounder output reduced by typically 2 dB when beacon is activated
- Voltage: 10-28vdc via Zener barrier or galvanic isolator
- ABS flame retardent UL94V0 housing - Red RAL3000
- Sealed to IP56
- LED colours: Amber, Red & Green
- Operating temperature: -40 to +60°C
Storage temperature: -40 to +70°C
Relative humidity: 95% at 40°C
- Weight: 0.40Kg
- ITS Certified
Standard: EN50020: 1994
- Certificate numbers:
ITS02ATEX2006
Ex02E2007 IIC system
Ex02E2008 IIC system
Ex02E2011 IIB system
Ex02E2012 IIB system
- Installation:
The unit may be powered from any certified Zener barrier whose output parameters do not exceed:
Uo: 28VDC
lo: 110mA
Po: 0.8W
or from any galvanic isolator specified by the system certificates
- Terminals accept 0.5 to 1.5mm2 cables
- Current when powered from 24v supply via 28v 300 Ohm Zener barrier
Alone: 25mA typical
With A105N-IS sounder: 48mA typical
- 5 Joule @ 1Hz
- 150 Candela output (clear lens)
- Optional 2.5 Joule @ 2 Hz
- 7 lens colours available -
Amber, Blue, Clear, Green, Opal, Red, Yellow
- Tube life: 5 Million flashes (after which emissions reduced to 70%)
- Voltages: 12vdc; 24vdc; 48vdc; 12vac; 24vac; 48vac; 115vac; 230vac
- Other voltages available upon request
- DC versions have reverse polarity protection
- Mounting via internal BESA compatible fixing positions
- Back box with mounting lugs also available
- IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
- Tropicalisation available on request
- Base colour available: Red (RAL3000), Grey or White
- Lens material: Polycarbonate
- Operating temperature: -25 to +55°C
- Storage temperature: -40 to +70°C
- Relative humidity: 90% at 20°C
- Weight: 0.20Kg
- Terminals accept 0.5 to 4.0mm2 cables
- UL approved version available
- 5 Joule @ 1Hz
- 150 Candela output (clear lens)
- Full synchronisation on multi-beacon installations
- Alternate flash, FLIP-FLOP selectable mode
- 7 lens colours available -
Amber, Blue, Clear, Green, Opal, Red, Yellow
- Tube life: 5 Million flashes (after which emissions reduced to 70%)
- Voltages: 12vdc; 24vdc; 48vdc; 12vac; 24vac; 48vac; 115vac; 230vac
- Other voltages available upon request
- DC versions have reverse polarity protection
- Mounting via internal BESA compatible fixing positions
- Back box with mounting lugs also available
- IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
- Tropicalisation available on request
- Base enclosure material: UL94V0 & 5VA rated FR ABS
- Base colour available: Red (RAL3000), Grey or White
- Lens material: Polycarbonate
- Operating temperature: -25 to +55°C
- Storage temperature: -40 to +70°C
- Relative humidity: 90% at 20°C
- Weight: 0.20Kg
- Terminals accept 0.5 to 4.0mm2 cables
- Dual 5 Joule Xenon: 1Hz (60 FPM) (5 Ws)
- BExCBG05-05D: EEx d IIB T5 (Tamb. -50 to +55°C)
- KEMA certified - ATEX/CENELEC approved
- Suitable for Zone 1, 2, 21 & 22, Gas Groups IIB & IIA
- Voltages: 12vdc; 24vdc; 48vdc; 115vac; 230vac
- Other voltages available upon request
- Six lens colours available: Amber, Blue, Clear, Green, Red & Yellow
- Automatic synchronisation on multi-beacon systems
- Beacons can be set to 'flip-flop' alternating mode with other units on multi-beacon systems
- Tube life: emissions reduced to 70% after 8 million flashes
- Xenon tubes mechanically secured against shock/vibration
- BExCBG05-05D: IP67
- Enclosure material: Marine grade LM6 Aluminium
- Chromated & powder coated finish - good resistance to humidity and salt spray environments
- Glass lens & Stainless Steel guard
- Colour available: Red (RAL3000)
- Operating temperature: -50 to +50°C
- Storage temperature: -50 to +70°C
- Large range of certified end of line resistors
- Weight: DC:4.00Kg AC:4.35Kg
- KEMA Certificate number: 01ATEX2222
Installation Features
- Very large termination area
- Dual M20 ISO cable gland entries (supplied with one stopping plug)
- Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
- IN & OUT terminals
- Terminals accept 0.5 to 4.0mm2 cables
- Line monitoring: Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)
- The beacons may be connected from a single supply for simultaneous operation or from seperate supplies for independent operation.
- 5 Joule Xenon: 1Hz (60 FPM) (5 Ws)
- BExBG05D:
EEx d IIC T5 (Tamb. -50 to +55°C)
EEx d IIC T6 (Tamb. -50 to +40°C)
- BExBG05E:
EEx de IIC T5 (Tamb. -50 to +55°C)
EEx de IIC T6 (Tamb. -50 to +40°C)
- KEMA certified - ATEX/CENELEC/FTZU approved
- Suitable for Zone 1, 2, 21 & 22, Gas Groups IIC IIB & IIA
- Voltages: 12vdc; 24vdc; 48vdc; 115vac; 230vac
- Six lens colours available: Amber, Blue, Clear, Green, Red & Yellow
- Automatic synchronisation on multi-beacon systems
- Beacons can be set to 'flip-flop' alternating mode with other units on multi-beacon systems
- Tube life: emissions reduced to 70% after 8 million flashes
- Xenon tubes mechanically secured against shock/vibration
- BExCBG05D: IP67 BExBG05E: IP66
- Enclosure material: Marine grade LM6 Aluminium
- Chromated & powder coated finish - good resistance to humidity and salt spray environments
- Glass lens & Stainless Steel guard
- Colour available: Red (RAL3000)
- Operating temperature:
-50 to +55°C
-50 to +40°C
- Storage temperature: -50 to +70°C
- Large range of certified end of line resistors
- Weight: DC:2.45Kg AC:2.75Kg
- KEMA Certificate number: 00ATEX2006 X
Installation Features
- Very large termination area
- Dual M20 ISO cable gland entries (supplied with one stopping plug)
- Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
- IN & OUT terminals
- Terminals accept 0.5 to 4.0mm2 cables
- Line monitoring: Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)
- 10 Joule Xenon: 1Hz (60 FPM) (10 Ws)
- BExBG10D:
EEx d IIC T4 (Tamb. -50 to +55°C)
EEx d IIC T5 (Tamb. -50 to +40°C)
- BExBG10E:
EEx de IIC T4 (Tamb. -50 to +55°C)
EEx de IIC T5 (Tamb. -50 to +40°C)
- KEMA certified - ATEX/CENELEC/FTZU approved
- Suitable for Zone 1, 2, 21 & 22, Gas Groups IIC IIB & IIA
- Voltages: 12vdc; 24vdc; 48vdc; 115vac; 230vac
- Six lens colours available: Amber, Blue, Clear, Green, Red & Yellow
- Automatic synchronisation on multi-beacon systems
- Beacons can be set to 'flip-flop' alternating mode with other units on multi-beacon systems
- Tube life: emissions reduced to 70% after 8 million flashes
- Xenon tubes mechanically secured against shock/vibration
- BExCBG10D: IP67 BExBG10E: IP66
- Enclosure material: Marine grade LM6 Aluminium
- Chromated & powder coated finish - good resistance to humidity and salt spray environments
- Glass lens & Stainless Steel guard
- Colour available: Red (RAL3000)
- Operating temperature:
-50 to +55°C (EExd IIC T4)
-50 to +40°C (EExd IIC T5)
- Storage temperature: -50 to +70°C
- Large range of certified end of line resistors
- Weight: DC:2.45Kg AC:2.75Kg
- KEMA Certificate number: 00ATEX2006 X
Installation Features
- Very large termination area
- Dual M20 ISO cable gland entries (supplied with one stopping plug)
- Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
- IN & OUT terminals
- Terminals accept 0.5 to 4.0mm2 cables
- Line monitoring: Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)
- 15 Joule Xenon: 1Hz (60 FPM) (15 Ws)
- BExBG15D:
EEx d IIC T4 (Tamb. -50 to +55°C)
EEx d IIC T5 (Tamb. -50 to +40°C)
- BExBG10E:
EEx de IIC T4 (Tamb. -50 to +55°C)
EEx de IIC T5 (Tamb. -50 to +40°C)
- KEMA certified - ATEX/CENELEC/FTZU approved
- Suitable for Zone 1, 2, 21 & 22, Gas Groups IIC IIB & IIA
- Voltages: 24vdc; 48vdc; 115vac; 230vac
- Six lens colours available: Amber, Blue, Clear, Green, Red & Yellow
- Automatic synchronisation on multi-beacon systems
- Beacons can be set to 'flip-flop' alternating mode with other units on multi-beacon systems
- Tube life: emissions reduced to 70% after 8 million flashes
- Xenon tubes mechanically secured against shock/vibration
- BExCBG15D: IP67 BExBG15E: IP66
- Enclosure material: Marine grade LM6 Aluminium
- Chromated & powder coated finish - good resistance to humidity and salt spray environments
- Glass lens & Stainless Steel guard
- Colour available: Red (RAL3000)
- Operating temperature:
-50 to +55°C (EExd IIC T4)
-50 to +40°C (EExd IIC T5)
- Storage temperature: -50 to +70°C
- Large range of certified end of line resistors
- Weight: DC:2.45Kg AC:2.75Kg
- KEMA Certificate number: 00ATEX2006 X
Installation Features
- Very large termination area
- Dual M20 ISO cable gland entries (supplied with one stopping plug)
- Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
- IN & OUT terminals
- Terminals accept 0.5 to 4.0mm2 cables
- Line monitoring: Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)
- The beacons may be connected from a single supply for simultaneous operation or from seperate supplies for independent operation.
- 5 Joule Xenon: 1Hz (60 FPM) (5 Ws)
- BExTBG05D:
EEx d IIC T5 (Tamb. -50 to +55°C)
EEx d IIC T6 (Tamb. -50 to +40°C)
- KEMA certified - ATEX/CENELEC/FTZU approved
- Suitable for Zone 1, 2, 21 & 22, Gas Groups IIC IIB & IIA
- Voltages: 115vac; 230vac
- Six lens colours available: Amber, Blue, Clear, Green, Red & Yellow
- Tube life: emissions reduced to 70% after 8 million flashes
- Xenon tubes mechanically secured against shock/vibration
- BExTBG05D: IP67
- Enclosure material: Marine grade LM6 Aluminium
- Chromated & powder coated finish - good resistance to humidity and salt spray environments
- Glass lens & Stainless Steel guard
- Colour available: Red (RAL3000)
- Operating temperature:
-50 to +55°C
-50 to +40°C
- Storage temperature: -50 to +70°C
- Weight: 2.45Kg
- KEMA Certificate number: 00ATEX2006 X
- The ring tone detect circuit senses the ringing voltage on the telephone line and switches the supply onto signal until the telephone is answered
Installation Features
- Very large termination area
- Dual M20 ISO cable gland entries (supplied with one stopping plug)
- Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
- IN & OUT terminals
- Terminals accept 0.5 to 4.0mm2 cables
- Telephone line ringing voltage switches power (115vac or 230vac) to enable beacon to operate
A heavy duty high output IP67 sealed beacon, ideal for harsh environments.
- MB005: 5 Joule @ 1Hz (5 Ws)
- MB010: 10 Joule @ 1Hz (10 Ws)
- Voltages: 12vdc; 24vdc; 48vdc; 24vac; 115vac; 230vac
- Other voltages available upon request
- Six lens colours available
- Automatic synchronised flash, or Flip-Flop alternating mode
- Xenon tube mechanically secured against vibration/shock
- Tube life: emissions reduced to 70% after 8 million flashes
- Reverse polarity protection on DC units
- Third party tested to IP67 & IP66
- Enclosure material: UL94V0 & 5VA rated FR ABS
- Colour available: Grey (RAL7038)
- Operating temperature: -25 to +55°C
- Storage temperature: -40 to +70°C
- Relative humidity: 90% at 20°C
- Weight: 1.48Kg
- Large termination area
- 2 x M20 ISO cable gland entries (with 1 blanking plug)
- Ratchet adjustable stainless steel 'U' bracket for 360° positioning
- All units offer IN & OUT terminals
- Terminals accept 0.5 to 4.0mm2 cables
A heavy duty high output IP67 sealed beacon, ideal for harsh environments.
- 2 x 5 Joule @ 1Hz beacons (5Ws)
- Voltages: 12vdc; 24vdc; 48vdc; 24vac; 115vac; 230vac
- Other voltages available upon request
- Six lens colours available
- Automatic synchronised flash, or Flip-Flop alternating mode
- Xenon tube mechanically secured against vibration/shock
- Reverse polarity protection on DC units
- Third party tested to IP67 & IP66
- Enclosure material: UL94V0 & 5VA rated FR ABS
- Colour available: Grey (RAL7038)
- Operating temperature: -25 to +55°C
- Storage temperature: -40 to +70°C
- Relative humidity: 90% at 20°C
- Weight: 2.00Kg
- Large termination area
- 2 x M20 ISO cable gland entries (with 1 blanking plug)
- Ratchet adjustable stainless steel 'U' bracket for 360° positioning
- All units offer IN & OUT terminals
- Terminals accept 0.5 to 4.0mm2 cables
- Beacons may use the same supply for simultaneous or seperate supplies for independent operation
These certified beacons have been designed for use in harsh environmental conditions. The stainless steel or marine grade alloy enclosures are suitable for use off shore or onshore, where light weight combined with corrosion resist ance and strength is required. Units can be painted to customer specifi cation and fitted with identification labels.
Available with optional EExe integral terminal chamber.
LED version available, offering extended lifetimes.
A high temperature version is available - contact MEDC for details.
- Zone 1 and Zone 2 use
- EExd, EExde IICT4/T6
- ATEX approved Ex II 2GD
- BASEEFA Certified
- UL Listed for USA and Canada:
- Class I, Div. 1, Groups C & D
- Class I, Zone 1 AExd IIB
- CSA Certified
- GOST 'R' & 'K' Certified*
- Chinese (CQST) Certified
- IP66 and IP67
- Certified temperature* -55°C to +70°C
- High temperature version (up to 85°C) available
- Stainless steel or marine grade alloy
- Xenon or LED versions
- Optional EExe terminal chamber
- Various lens colours
- Optional lens guard
- Telephone or relay initiated
*Depending on version.
These certified rotating beacons have been designed for use in potentially explosive atmospheres and harsh environmental conditions. The enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance is required.
The housing is manufactured completely from a U.V. stable, glass reinforced polyester. Stainless steel screws and mounting bracket are available ensuring a totally corrosion free product.
Units can be painted to customer specification and supplied with identification labels.
- Zone 1 and Zone 2 use
- EExd, IIB T4 and T5
- ATEX approved, Ex II 2G
- BASEEFA Certified
- IP66 and IP67
- Certified temperature -55°C to +70°C
- 55W and 70W tungsten halogen bulb*
- Various rotating speeds available
- Corrosion resistant GRP
- Optional stainless steel backstrap
- Various lens colours
- Optional lens guard
*Voltage dependent.
These high output (21 Joule) beacons have been designed for use in potentially explosive atmospheres and harsh environmental conditions. The marine grade alloy or stainless steel enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance and strength is required. Units can be painted to customer specification and fitted with identification labels.
Available with optional EExe terminal chamber.
- Zone 1 and Zone 2 use
- EExde IICT5
- ATEX approved Ex II 2G
- BASEEFA certified
- UL Listed for USA and Canada
- Hazardous locations:
Class I, Div 1, Groups C & D
Class I, Zone 1, AExd IIB T4
- Ordinary locations: Visual-Signal Device
- GOST 'R' Certified
- Australian (SAA) certified
- *Certified temperature -55°C to +70°C
- IP67 and IP66
- Stainless steel or marine grade alloy
- Various lens colours
- Twin replaceable tubes
- EExde version has gland earth continuity in the GRP terminal chamber
- Tapered spigot flamepath
- Telephone or relay initiated option
- Optional lens guard
*Depending on version.
These certified rotating beacons have been designed for use in flammable atmospheres and harsh environmental conditions. The marine grade alloy enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance and strength is required. Units can be painted to customer specification and fitted with identification labels.
There are two models available,
(1) standard rotating mirror with tungsten halogen bulb.
(2) sequenced flashing xenon tubes.
Both models are available with optional EExe terminal chamber.
- Zone 1 use
- EExde IIBT4/T6
- ATEX approved Ex II 2G
- BASEEFA certified
- Certified temperature -20°C to +55°C*
- IP66, IP67 and IP68
- Corrosion Resistant
- EExde version has gland earth continuity in the GRP terminal chamber
- Optional guard
- Retained cover screws
- Various lens colours
*Model dependent.
This range of ruggedised, intrinsically safe and weatherproof beacons, intended for use in potentially explosive atmospheres, has been designed with high ingress protection to cope with the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries.
The unit is available in 12V and 24V versions and for gas groups IIB or IIC.
A lower cost, uncertified version is available for use in non-explosive atmospheres.
- Zones 0, 1, 2 & safe area use
- EExia IIB/IIC T4
- ATEX approved, Ex II 1G
- BASEEFA certified
- GOST 'R' certified
- IP66 & IP67
- Certified temperature -55°C to +60°C
- Corrosion resistant red GRP body
- High intensity flash
- Clear polycarbonate lens
- Retained stainless steel cover screws
- Encapsulated electronics
These compact and lightweight beacons have been designed for use in potentially explosive atmospheres and harsh environmental conditions. The beacon housing, including the flamepaths, is manufactured completely from a UV stable glass reinforced polyester which is ideally suited for use offshore and onshore.
Stainless Steel screws and mounting bracket are incorporated ensuring a totally corrosion free unit.
Units can be painted to customer specification and supplied with identification labels.
- Zone 1 and Zone 2 use
- EExd IIC T6
- ATEX Approved, Ex II 2G
- BASEEFA Certified
- IP66 and IP67
- Certified Temperature -55°C to +55°C
- Corrosion Free GRP
- Various lens colours
- Optional lens guard
- Optional gland plus cable tail
- Stainless steel mounting bracket & screws
- Replaceable tube
These compact and lightweight 10 & 15 Joule beacons have been designed for use in potentially explosive atmospheres and harsh environmental conditions. The beacon housing, including the flamepaths, is manufactured completely from a UV stable glass reinforced polyester which is ideally suited for use offshore and onshore.
Stainless Steel screws and mounting bracket are incorporated ensuring a totally corrosion free unit. An additional body clamp is available for highvibration environments.
Units can be painted to customer specification and supplied with identification labels.
- Zone 1 and Zone 2 use
- EExd(e) IIB T4
- ATEX Approved, Ex II 2G
- BASEEFA Certified
- GOST 'R' Certified
- IP66 and IP67
- Certified Temperature* -55°C to +55°C
- Low current 10 Joule version available
- Corrosion Free GRP
- Various lens colours
- Lens guard fitted as standard
- Stainless steel mounting bracket & screws
- Replaceable twin tubes
- Optional telephone initiate
- Optional earth continuity
*Model dependent.
These certified beacons have been designed for use in potentially explosive gas and dust atmospheres and harsh environmental conditions. The glass reinforced polyester enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance is required.
The beacon housing is manufactured completely from a U.V. stable, glass reinforced polyester. Stainless steel screws and mounting bracket are incorporated ensuring a totally corrosion free product.
Units can be painted to customer specification and supplied with identification labels.
- Zone 1 and Zone 2 use
- EExd IIB T4, T5 & T6
- ATEX approved, Ex II 2GD
- BASEEFA certified
- UL Listed for USA and Canada
- Hazardous locations:
Class I, Div 2, Groups C & D
Class I, Zones 1 & 2, AExd IIB T4/T5
- Ordinary locations: Visual-Signal Device
- Australian (SAA) certified
- Chinese (CQST) certified
- IP66 and IP67
- Certified temperature -55°C to +70°C
- Corrosion resistant GRP
- Optional stainless steel backstrap
- Various lens colours
- Optional lens guard
- Optional telephone initiation
- 2 x M20 cable entries or 2 x 1/2" NPT*
- Earth continuity option (model dependent)
- Filament version (20W) available†
- Fluorescent version (10W) available†
- Beacon/Sounder Combination Unit available
*Model dependent.
†See FL11, FB11, FL12, FB12 data sheet.
These high output certifi ed beacons have been designed for use in potentially explosive atmospheres and harsh environmental conditions. The enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance is required.
The beacon housing is manufactured completely from a U.V. stable, glass reinforced polyester. Stainless steel screws and mounting bracket are incorporated ensuring a totally corrosion free product.
Units can be painted to customer specification and supplied with identification labels.
- Zone 1 and Zone 2 use
- EExd, IIB T4 & T5
- ATEX approved, Ex II 2G
- BASEEFA certified
- UL Listed for USA and Canada
- Hazardous locations:
Class I, Div 2, Groups C & D
Class I, Zones 1 & 2, AExd IIB T4 & T5
- Ordinary locations: Visual-Signal Device
- GOST 'K' Certified
- Chinese (CQST) certified
- High Output (21 Joules)
- IP66 and IP67
- Certified temperature -55°C to +70°C
- Corrosion resistant GRP
- Optional stainless steel backstrap
- Various lens colours
- Optional lens guard
- Optional telephone initiation
- Twin replaceable tubes
*Model dependent.
†See FL11, FB11, FL12, FB12 datasheet.
This range of ruggedised, weatherproof beacons, has been designed with high ingress protection to cope with harsh environmental conditions.
- Weatherproof
- IP66 & IP67
- Operating temperature -55°C to +70°C
- Corrosion resistant red GRP body
- High intensity flash
- Polycarbonate lens, various colours available
- Retained stainless steel cover screws
- Optional lens guard
- Optional telephone or relay initiate
- 3 x M20 cable entries
- Replaceable tube
- Switchable dual flash
These certified beacons have been designed for use in potentially explosive atmospheres and harsh environmental conditions. The enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance is required.
The housings are manufactured completely from a U.V. stable, glass reinforced polyester. Stainless steel screws and mounting bracket are available ensuring a totally corrosion-free product.
The model XB15 contains a supervisory diode and four wire lead connections for alarm applications.
Units can be painted to customer specification and supplied with identification labels.
These listed beacons have been designed for use in potentially explosive atmospheres and harsh environmental conditions. The enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance is required.
The housing is manufactured from a U.V. stable, glass reinforced polyester, with the lens manufactured from a U.V. stable polycarbonate. Stainless steel screws are used ensuring a totally corrosion-free product.
The model XB16 contains supervisory diode and four wire leads for fire alarm applications. This beacon is also available UL 1971 (ADA) listed for hearing impaired applications.
Units can be painted to customer specification and supplied with identification labels.
These certified steady beacons have been designed for use in potentially explosive atmospheres and harsh environmental conditions. The enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance is required.
The housings are manufactured completely from a U.V. stable, glass reinforced polyester. Stainless steel screws and mounting bracket are available ensuring a totally corrosion-free product.
Units can be painted to customer specification and supplied with identification labels.
- Zone 1 and Zone 2 use
- EExd IIC T3/T4
- ATEX approved, Ex II 2GD
- UL listed for USA and Canada
- Hazardous locations:
Class I, Div. 2, Groups A, B, C & D
Class I, Zone 1, AExd IIC T3/T4
- Ordinary locations: Visual-Signal Device
- IP66 & 67
- Certified temperature -55°C to +70°C
- Pipe mount or direct mount enclosure
- Corrosion resistant GRP
- 60W or 100W filament bulb
- Optional stainless steel backstrap
- Various lens colours
- Optional cast or wire lens guard
- Up to 3 x M20 or 3 x M25 entries
These certified steady beacons have been designed for use in harsh environmental conditions. The marine grade stainless steel or alloy enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resist ance and strength is required. Units can be painted to customer specification and fitted with identification labels.
Available with optional EExe terminal chamber (stainless steel versions only).
- Zone 1 and Zone 2 use
- EExd IIC T4/T6
- *ATEX approved Ex II 2GD
- BASEEFA certified
- *UL listed for USA and Canada
- Class I, Div. 1, Groups C & D
- Class I, Zone 1, AExd IIB
- *CSA certified
- *GOST 'R' certified
- Chinese (CQST) certified
- Fluorescent
- Filament
- IP66 and IP67
- Corrosion Resistant
- Fluorescent version suitable for obstruction or warning lighting
- Optional EExe terminal chamber
- Optional guard
*Model dependent.
These certified steady beacons have been designed for use in flammable atmospheres and harsh environmental conditions. The marine grade alloy or stainless steel enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance and strength is required. Units can be painted to customer specification and fitted with identification labels.
Available with optional EExe terminal chamber.
- Zone 1 and Zone 2 use
- EExde IICT3/T6
- ATEX approved Ex II 2G
- BASEEFA certified
- UL listed for USA and Canada
- Hazardous locations:
Class I, Div. 1, Groups C & D
Class I, Zone 1, AExd IIB T4/T5
- Ordinary locations: Visual-Signal Device
- GOST 'R' certified
- Certified temperature -55°C to +55°C
- IP66 and IP67
- Fluorescent
- Filament
- Corrosion Resistant
- EExde version has gland earth continuity in the GRP terminal chamber
- Optional lens guard
- Tapered spigot flamepath
- Retained cover screws
These certified steady beacons have been designed for use in flammable atmospheres and harsh environmental conditions. The marine grade alloy enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance and strength is required. Units can be painted to customer specification and fitted with identification labels.
All models available with optional EExe terminal chamber.
- Zone 1 and Zone 2 use
- EExde IIBT3/T4
- ATEX approved Ex II 2G
- BASEEFA certified
- CSA certified (HS5 only)
- Certified temperature -20°C to +50°C*
- IP66, IP67 & IP68
- Fluorescent/sodium/mercury/filament
- EExde version has gland earth continuity in the GRP terminal chamber
- Corrosion Resistant
- Optional guard
- Retained cover screws
*Model dependent.
These certified steady beacons have been designed for use in potentially explosive atmospheres and harsh environmental conditions. The enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance is required.
The beacon housing is manufactured completely from a U.V. stable, glass reinforced polyester. Stainless steel screws and mounting bracket are available ensuring a totally corrosion free product.
Units can be painted to customer specification and supplied with identification labels.
- Zone 1 and Zone 2 use
- EExd, IIB T4/T5
- ATEX approved, Ex II 2GD*
- UL listed for USA and Canada*
-Class I, Div. 2, Groups C & D
-Class I, Zone 1, AExd IIB T4/T5
- BASEEFA Certified
- Fluorescent
- Filament
- IP66 and IP67
- Certified temperature -55°C to +55°C*
- Corrosion resistant GRP
- Optional stainless steel backstrap
- Various lens colours
- Optional lens guard
- 2 x M20 or 2 x 1/2" NPT cable entries
- Earth continuity option
*Model dependent.
The comprehensive range of high efficiency xenon beacons offers high light output with customs built attachments for the Hosiden Besson Banshee and Bedlam range of electronic sounders.
Used alone, the xenon beacons are ideal where bold visual indication is required. Mounting with the custom built attachment allows the strobe and sounder to become one.
- Four power ratings - 1,2,3 & 5 watt
- Flash rate of 60 per minute
- Operates on 12 or 24 Vdc
- Rated at IP65 as standard
- Weatherproof version available with enclosed terminals
- Combination bracket for strobe and sounder
- Hard wearing polycarbonate lenses with different colour options
- Easy to install
|
E2S L101 AlertAlight L.E.D. or Filament Bulb Beacon
