Listings by Brand

Listings by Category

E2S BExA110 & BExDA110 ATEX EEx Hazardous Area Voice Annunciation Unit

General Introduction
The sounder records, stores and plays back user defined messages stored directly to non-volatile memory without any intermediate analogue to digital conversion.

A single 16 second, message may be recorded and played back with a choice of 1 of 10 user selectable alarm tones (including silence to allow speech only option).

• Nominal output: 110dB(A) @ 1m +/-3dB - Tone 5
• A110D: EEx d IIC T4 (Tamb. -50 to +55°C)
• A110E: EEx de IIC T4 (Tamb. -50 to +55°C)
• KEMA certified - ATEX/CENELEC/FTZU approved
• 10 alarm tones (UKOOA/PFEER compliant)
• Edits automatically to message length
• Easy message creation with built in microphone
• Volume control
• 100m effective range @ 1kHz
• Voltages: 24vdc; 115vac; 230vac
• DC versions has reverse polarity protection
• A110D: IP67 A110E: IP66
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExA110 Horn: High impact UL94V0 & 5VA FR ABS
• BExDA110 Horn: Anti-Static High impact ABS
• Operating temperature: -50 to +55°C
• Storage temperature: -50 to +70°C
• Large range of certified end of line resistors
• Weight: DC: 3.20Kg AC: 3.40Kg
• KEMA Certificate number: 99ATEX6312

Installation Features

• Very large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN and OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Line monitoring: Min 500 Ohm 2w, 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)

>>> back to e2s menu

E2S BExA120 & BExDA120 ATEX EEx Hazardous Area Voice Annunciation Unit

General Introduction
The sounder records, stores and plays back user defined messages stored directly to non-volatile memory without any intermediate analogue to digital conversion.

A single 16 second, message may be recorded and played back with a choice of 1 of 10 user selectable alarm tones (including silence to allow speech only option).

• Nominal output: 113dB(A) @ 1m +/-3dB - Tone 5
• A120D: EEx d IIC T4 (Tamb. -50 to +55°C)
• A120E: EEx de IIC T4 (Tamb. -50 to +55°C)
• KEMA certified - ATEX/CENELEC/FTZU approved
• 10 alarm tones (UKOOA/PFEER compliant)
• Edits automatically to message length
• Easy message creation with built in microphone
• Volume control
• 100m effective range @ 1kHz
• Voltages: 24vdc; 115vac; 230vac
• DC versions has reverse polarity protection
• A120D: IP67 A120E: IP66
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExA120 Horn: High impact UL94V0 & 5VA FR ABS
• BExDA120 Horn: Anti-Static High impact ABS
• Operating temperature: -50 to +55°C
• Storage temperature: -50 to +70°C
• Large range of certified end of line resistors
• Weight: DC: 3.20Kg AC: 3.40Kg
• KEMA Certificate number: 99ATEX6312

Installation Features

• Very large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN and OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Line monitoring: Min 500 Ohm 2w, 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)

>>> back to e2s menu

E2S MV112 Marine Grade IP67 Voice Annunciation Unit

General Introduction
A heavy duty high output IP67 sealed voice annunciation sounder, ideal for harsh environments with high ambient.

The sounder records, stores and plays back user defined messages stored directly to non-volatile memory without any intermediate analogue to digital conversion.

A single 16 second, or two 8 second messages may be recorded and played back with a choice of 1 of 10 user selectable alarm tones.

• Maximum output: 110dB(A) @ 1 metre
  Voice output: approx. 105dB(A) @ 1m +/-3dB
• Direct message storage on silicon: 16 seconds of speech
• Very high voice reproduction quality (moving coil loudspeaker)
• 10 alarm tones (including silence to allow speech only option) UKOOA/PFEER compliant
• Volume control & tone duration control
• Message length: 1 x 16 seconds or 2 x 8 seconds
• 100m effective range @ 1kHz
• Voltages: 12vdc(9-15vdc); 24vdc(18-30vdc); 115vac; 230vac
• Easy message creation with built in microphone
• Edits automatically to message length
• Third party tested to IP67 & IP66
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Grey (RAL7038)
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 2.50Kg AC: 3.00Kg
• Large termination area
• 2 x M20 ISO cable gland entries (with 1 blanking plug)
• Ratchet adjustable stainless steel 'U' bracket for 360° positioning
• Terminals accept 0.5 to 4.0mm² cables

>>> back to e2s menu

E2S A105N Appello P.I.R. Voice Annunciation Unit

General Introduction
Record & store a user defined 16 second voice message. Message is repeated whilst P.I.R. remains activated.

• Maximum output: 105dB(A) @ 1 metre
• Direct message storage on silicon: 16 seconds of speech
• Very high voice reproduction quality (moving coil loudspeaker)
• Volume control
• P.I.R. is in constant monitoring state - replays message upon activation
• 32m effective range @ 1kHz
• Voltages: 12vdc(9-15vdc); 24vdc(18-30vdc); 115vac; 230vac
• Easy message creation with built in microphone
• Edits automatically to message length
• DC versions have reverse polarity diode protection
• IP55 - can be increased to IP66 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 0.75Kg AC: 1.10Kg
• Cable gland knockouts in the rear of the unit
• Side M20 cable gland entry and IP55 stopping plug
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

>>> back to e2s menu

E2S A105N Appello Speech & Tone Voice Annunciation Unit

General Introduction
The sounder records, stores and plays back user defined messages stored directly to non-volatile memory without any intermediate analogue to digital conversion.

A single 16 second, or two 8 second messages may be recorded and played back with a choice of 1 of 10 user selectable alarm tones.

• Maximum output: 105dB(A) @ 1 metre
• Direct message storage on silicon: 16 seconds of speech
• Very high voice reproduction quality (moving coil loudspeaker)
• 10 alarm tones (including silence to allow speech only option) UKOOA/PFEER compliant
• Volume control & tone duration control
• Message length: 1 x 16 seconds or 2 x 8 seconds
• 32m effective range @ 1kHz
• Voltages: 12vdc(9-15vdc); 24vdc(18-30vdc); 115vac; 230vac
• Easy message creation with built in microphone
• Edits automatically to message length
• DC versions have reverse polarity diode protection
• IP55 - can be increased to IP66 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 0.75Kg AC: 1.00Kg
• Cable gland knockouts in the rear of the unit
• Side M20 cable gland entry and IP55 stopping plug
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

>>> back to e2s menu

E2S A105N Appello Synchronised Voice Annunciation Unit

General Introduction
The sounder is primarily intended for use in fire alarm and evacuation systems. It is fully synchronised with other units of the same type on the same circuit. It offers a three stage alarm facility enabling three verbal messages to be linked with 1 of 10 different tones for the 1st stage and 1 of 3 tones for the 2nd & 3rd stages. Three volume levels and an adjustment potentiometer are provided.

The unit is preprogrammed with three standard messages
1. "Please evacuate the building immediately"
2. "Alarm test, take no action"
3. "Alarm test now complete"
or an alternative message of your choice can be stated when ordering.

• Maximum output: 105dB(A) @ 1 metre - 3 sound levels selectable
• Direct message storage on silicon; no degradation in reproduction or standby power required
• Very high voice reproduction quality (moving coil loudspeaker)
• 14 alarm tones (10 for 1st stage) UKOOA/PFEER compliant
• 3 stage alarm option (3 different messages)
• Volume level settings
• Total message length: 16 seconds
• 32m effective range @ 1kHz
• Voltages: 24vdc(10-30vdc); 115vac; 230vac
• Automatic synchronisation on multi-sounder systems
• Edits automatically to message length
• DC versions have reverse polarity diode protection
• IP55 - can be increased to IP66 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 0.75Kg AC: 1.00Kg
• Cable gland knockouts in the rear of the unit
• Side M20 cable gland entry and IP55 stopping plug
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

>>> back to e2s menu