Listings by Brand

Listings by Category

Armstrong 6024ARM Alarm Bell

General Introduction
The Armstrong 6024ARM alarm bell is an easy to install, maintenance free signaling device designed to cater for the needs of Fire Detection System with Central Control Equipment. This low current, high performance bell, services the needs of most adverse condition providing fewer working parts, easy installation, high level sound output. Providing a clear warning to personnel during emergency. The 6024ARM alarm bell is designed to EN-54 with built in varistor to meet the EMC requirement.

E2S A140 Disaster Warning Alarm Sounder

General Introduction
A compact, high powered, lightweight unit.

Applications include large industrial sites, quarries, remote CEMAH sites, agricultural or forestry sites.

• Maximum output: 140dB(A) @ 1 metre
• 32 alarm tones
• 3 stage alarm option
• Automatic synchronisation on multi-sounder systems
• 1 to 2Km effective range @ 1kHz
• Voltages: 24vdc(21-28vdc); 115vac; 230vac
• Ideal for battery back-up applications
• DC versions have reverse polarity diode protection
• Fully programmable version with 4 stages available
• Special tones available on request
• Enclosure material: Lightweight fibreglass
• Colour available: Grey
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight 25Kg

E2S A100 & AL100 AlertAlarm Alarm Sounder

General Introduction
A continuously rated compact sounder, ideal for fire and security applications.

• Maximum output: 104dB(A) @ 1 metre
  Nominal output: 100dB(A) @ 1m +/-3dB, Tone 2
• 32 alarm tones
• 3 stage alarm option
• Volume control (both AC & DC versions)
• Automatic synchronisation on multi-sounder systems
• 32m effective range @ 1kHz
• Voltages: 24vdc(10-30vdc); 48vdc(35-60vdc); 24vac; 115vac; 230vac
• Other voltages available upon request
• DC versions may be used on 24vac +/-10% for single stage applications
• Reverse polarity switching on DC units
• IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight:
  A100: DC: 0.26Kg AC: 0.37Kg
  AL100: DC: 0.46Kg AC: 0.57Kg
• UL approved version available
• 3 x gland knockouts in side & back
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S A100 & AL100 Sontel Telephone Ringer Sounder

General Introduction
A continuously rated compact telephone ringer sounder.

• Maximum output: 104dB(A) @ 1 metre
  Nominal output: 100dB(A) @ 1m +/-3dB, Tone 2
• 3 alarm tones
• Direct power from telephone line (REN 1)
  (Xenon Strobe add-on requires AC power supply)
• IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: 0.26Kg
• 3 x gland knockouts in side & back
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S A105N & AL105N AlertAlarm Alarm Sounder

General Introduction
A heavy duty sounder, ideal for fire, security and process control applications.

• Maximum output: 112dB(A) @ 1 metre
  Nominal output: 106dB(A) @ 1m +/-3dB, Tone 2
• 32 alarm tones
• 3 stage alarm option
• Volume control (both AC & DC versions)
• Automatic synchronisation on multi-sounder systems
• 60m effective range @ 1kHz
• Voltages: 24vdc(10-30vdc); 48vdc(35-60vdc); 24vac; 115vac; 230vac
• Other voltages available upon request
• DC versions may be used on 24vac +/-10% for single stage applications
• Reverse polarity switching on DC units
• IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight:
  A105N: DC: 0.75Kg AC: 1.00Kg
  AL105N: DC: 0.95Kg AC: 1.20Kg
• UL approved version available
• Cable gland knockouts in the rear of the unit
• Side M20 cable gland entry and IP55 stopping plug
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S A105N & AL105N Sontel Telephone Ringer Sounder

General Introduction
A continuously rated high output telephone ringer sounder.

• Maximum output: 112dB(A) @ 1 metre
  Nominal output: 105dB(A) @ 1m +/-3dB, Tone 2
• 3 alarm tones
• Direct power from telephone line (REN 1)
  (Xenon Strobe add-on requires AC power supply)
• IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: 0.75Kg
• Cable gland knockouts in the rear of the unit
• Side M20 cable gland entry and IP55 stopping plug
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S A105N-IS Intrinsically Safe EEx ia IIB & IIC 32 Tone Alarm Sounder

General Introduction

• A105N-IS-B: EEx ia IIB T4 (Tamb. +60°C)
• A105N-IS-C: EEx ia IIC T4 (Tamb. +60°C)
• Output:
  A105N-IS-B: 105dB(A) @ 1 metre
  A105N-IS-C: 103dB(A) @ 1 metre
• 32 alarm tones (PFEER/UKOOA compliant)
• 3 stage alarm
• Versions rated for Zone 0, 1 & 2, Gas group IIB or IIC
• Auto synchronised sound output
• ABS flame retardent UL94V0 housing - Red RAL3000
• Voltage: 8-30vdc via Zener barrier or galvanic isolator
• End of line resistor certified
• Input overload and reverse current protection
• Sealed to IP66
• Low current draw
• Operating temperature: -40 to +60°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 50°C
• Weight: 1.00Kg
• Effective range at 1kHz: IIB 60m, IIC 45m
• BASEEFA Certified
  Standard:
  EN50014: 1997
  EN50020: 1994
  EN50284: 1999
• Certificate numbers:
  BAS00ATEX1180
  BAS00ATEX1181
  BAS Ex 98D2016system
  BAS Ex 98D2015system
  BAS Ex 98D2014system
  BAS Ex 98D2013system
• USA FM Approved
  Standard: 3610 Entity
  Code: CLI,II,III, Div 1, GPA,B,C,D,E,F & G
• Installation:
  The A105N-IS-B & A105N-IS-C may be powered from any certified Zener barrier whose output parameters do not exceed:
  Uo: 30VDC
  lo: 110mADC
  Wo: 0.85W
  or from any galvanic isolator specified by the system certificates
• Terminals accept 0.5 to 2.5mm² cables
• Current: 25mA typical when powered from 24v supply via 28v 300 Ohm Zener barrier
• Second & Third stage alarms:
  2nd Stage: Less than +0.9v
  3rd Stage: Less than +0.9v

E2S A112 & AL112 AlertAlarm Alarm Sounder

General Introduction
A very high output sounder, ideal for industrial applications with high ambient noise levels.

• Maximum output: 119dB(A) @ 1 metre
  Nominal output: 112dB(A) @ 1m +/-3dB, Tone 2
• 45 alarm tones
• 3 stage alarm option
• Volume control
• Automatic synchronisation on multi-sounder systems
• 125m effective range @ 1kHz
• Voltages: 24vdc(10-30vdc); 48vdc(35-60vdc); 24vac; 115vac; 230vac
• Other voltages available upon request
• DC versions may be used on 24vac +/-10% for single stage applications
• Positive stage switching DC version available
• Reverse polarity switching on DC units
• Fully programmable version with 4 stage available
• IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight:
  A112: DC: 1.80Kg AC: 2.10Kg
  AL112: DC: 2.00Kg AC: 2.30Kg
• UL approved version available
• Large termination area
• Cable gland knockouts in the rear of the unit
• Side M20 cable gland entry and IP55 stopping plug
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 4.0mm² cables

E2S A121 & AL121 AlertAlarm Alarm Sounder

General Introduction
A very high output sounder, ideal for industrial applications with high ambient noise levels.

• Maximum output: 126dB(A) @ 1 metre
  Nominal output: 121dB(A) @ 1m +/-3dB, Tone 2
• 45 alarm tones (UKOOA/PFEER compliant)
• 3 stage alarm option
• Volume control
• Automatic synchronisation on multi-sounder systems
• 300m effective range @ 1kHz
• Voltages: 24vdc(10-30vdc); 48vdc(35-60vdc); 24vac; 115vac; 230vac
• Other voltages available upon request
• DC versions may be used on 24vac +/-10% for single stage applications
• Positive stage switching DC version available
• Reverse polarity switching on DC units
• Fully programmable version with 4 stage available
• IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight:
  A121: DC: 2.10Kg AC: 2.70Kg
  AL121: DC: 2.30Kg AC: 2.90Kg
• UL approved version available
• Large termination area
• Cable gland knockouts in the rear of the unit
• Side M20 cable gland entry and IP55 stopping plug
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 4.0mm² cables

E2S Bedhead Flush Mount Alarm Sounder

General Introduction

• Maximum output: 95dB(A) @ 1 metre
  Nominal output: 90dB(A) @ 1m +/-3dB
• 10 alarm tones
• 3 stage alarm option
• Volume control
• 10m effective range @ 1kHz
• Voltage: 24vdc(10-30vdc)
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000) or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: 0.06Kg
• Compatible with standard BESA back boxes
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S SON2 Sonora Alarm Sounder

General Introduction
A continuously rated compact sounder, ideal for fire and security applications.

• Maximum output: 104dB(A) @ 1 metre
  Nominal output: 100dB(A) @ 1m +/-3dB, Tone 2
• 32 alarm tones
• 3 stage alarm option
• Volume control (3 levels)
• Automatic synchronisation on multi-sounder systems
• 32m effective range @ 1kHz
• Voltages: 24vdc(10-30vdc); 115vac; 230vac
• Other voltages available upon request
• Reverse polarity switching on DC units
• Reverse polarity diode protection on DC units
• IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 0.30Kg AC: 0.40Kg
• 4 x gland knockouts in side & back
• Mounting via internal BESA compatible fixing positions
• AC units have external mounting lugs in addition to the above
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S SONF1 / SONFL1 Sonora Alarm Sounder

General Introduction
A continuously rated compact sounder, ideal for fire and security applications.

• Nominal output: 100dB(A) @ 1m +/-3dB, Tone 2
• 10 alarm tones
• 2 stage alarm option
• Volume control
• Automatic synchronisation on multi-sounder systems
• 32m effective range @ 1kHz
• Voltages: 24vdc(10-30vdc)
• Other voltages available upon request
• Reverse polarity diode protection on DC units
• IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000) or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: 0.26Kg
• UL approved version available
• 4 x gland knockouts in side & back
• Mounting via internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S BExS110 & BExDS110 ATEX EEx Hazardous Area Alarm Sounders

General Introduction

• Maximum output 117dB(A) @ 1 metre
• Nominal output: 110dB(A) @ 1m +/-3dB, Tone 2
• S110D: EEx d IIC T4 (Tamb. -50 to +55°C)
• S110E: EEx de IIC T4 (Tamb. -50 to +55°C)
• KEMA certified - ATEX/CENELEC/FTZU approved
• 32 alarm tones (UKOOA/PFEER compliant)
• 3 stage alarm
• Volume control (except 12vdc unit)
• Automatic synchronisation on multi-sounder systems
• 100m effective range @ 1 kHz
• Voltages: 12vdc; 24vdc; 48vdc; 115vac; 230vac
• Negative or positive remote switching
• S110D: IP67 S110E: IP66
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExS110 Horn: High impact UL94 V0 & 5VA FR ABS
• BExDS110 Horn: Anti-static High impact ABS
• Operating temperature: -50 to +55°C
• Storage temperature: -50 to +70°C
• Large range of certified end of line resistors
• Weight: DC: 3.20Kg AC: 3.40Kg
• KEMA Certificate number: 99ATEX6312

Installation Features

• Very large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Line monitoring: Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)

E2S BExS120 & BExDS120 ATEX EEx Hazardous Area Alarm Sounders

General Introduction

• Maximum output 123dB(A) @ 1 metre
• Nominal output: 117dB(A) @ 1m +/-3dB, Tone 2
• S120D: EEx d IIC T4 (Tamb. -50 to +55°C)
• S120E: EEx de IIC T4 (Tamb. -50 to +55°C)
• KEMA certified - ATEX/CENELEC/FTZU approved
• 32 alarm tones (UKOOA/PFEER compliant)
• 3 stage alarm
• Volume control (except 12vdc unit)
• Automatic synchronisation on multi-sounder systems
• 200m effective range @ 1 kHz
• Voltages: 12vdc; 24vdc; 48vdc; 115vac; 230vac
• Negative or positive remote switching
• S120D: IP67 S120E: IP66
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExS120 Horn: High impact UL94 V0 & 5VA FR ABS
• BExDS120 Horn: Anti-static High impact ABS
• Operating temperature: -50 to +55°C
• Storage temperature: -50 to +70°C
• Large range of certified end of line resistors
• Weight: DC: 3.20Kg AC: 3.40Kg
• KEMA Certificate number: 99ATEX6312

Installation Features

• Very large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Line monitoring: Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)

E2S MA112 Marine Grade IP67 Alarm Sounders

General Introduction
A heavy duty high output IP67 sealed sounder, ideal for harsh environments with high ambient noise level.

• Maximum output 119dB(A) @ 1 metre
• Nominal output: 112dB(A) @ 1m +/-3dB, Tone 2
• 45 alarm tones (UKOOA/PFEER compliant)
• 3 stage alarm option
• Volume control
• Automatic synchronisation on multi-sounder systems
• 125m effective range @ 1 kHz
• Voltages: 24vdc(10-30vdc); 48vdc(35-60vdc); 24vac; 115vac; 230vac
• Other voltages available upon request
• DC versions may be used on 24vac +/-10% for single stage applications
• Positive stage switching DC version available
• Reverse polarity switching on DC units
• Fully programmable version with 4 stages available
• Third party tested to IP67 & IP66
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Grey (RAL7038)
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 2.50Kg AC: 3.00Kg
• Large termination area
• 2 x M20 ISO cable gland entries (with 1 blanking plug)
• Ratchet adjustable stainless steel 'U' bracket for 360° positioning
• All units offer IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cable

E2S MA121 Marine Grade IP67 Alarm Sounders

General Introduction
A heavy duty high output IP67 sealed sounder, ideal for harsh environments with high ambient noise level.

• Maximum output 126dB(A) @ 1 metre
• Nominal output: 121dB(A) @ 1m +/-3dB, Tone 2
• 45 alarm tones (UKOOA/PFEER compliant)
• 3 stage alarm option
• Volume control
• Automatic synchronisation on multi-sounder systems
• 350m effective range @ 1 kHz
• Voltages: 24vdc(10-30vdc); 48vdc(35-60vdc); 24vac; 115vac; 230vac
• Other voltages available upon request
• DC versions may be used on 24vac +/-10% for single stage applications
• Positive stage switching DC version available
• Optional reverse polarity switching on DC units
• Fully programmable version with 4 stages available
• Third party tested to IP67 & IP66
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Grey (RAL7038)
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 2.50Kg AC: 3.00Kg
• Large termination area
• 2 x M20 ISO cable gland entries (with 1 blanking plug)
• Ratchet adjustable stainless steel 'U' bracket for 360° positioning
• All units offer IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cable

E2S BExTS110 & BExDTS110 ATEX EEx Telephone Initiated Alarm Sounders

General Introduction

• Maximum output 117dB(A) @ 1 metre
• Nominal output: 110dB(A) @ 1m +/-3dB, Tone 2
• TS110D: EEx d IIC T4 (Tamb. -50 to +55°C)
• KEMA certified - ATEX/CENELEC/FTZU approved
• Suitable for Zone 1 & 2, Gas groups IIC, IIB & IIA
• 32 alarm tones (UKOOA/PFEER compliant)
• 100m effective range @ 1 kHz
• Voltages: 115vac; 230vac
• S110D: IP67
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExTS110D Horn: High impact UL94 V0 & 5VA FR ABS
• BExDTS110D Horn: Anti-static High impact ABS
• Colour available: Red (RAL3000)
• Operating temperature: -50 to +55°C
• Storage temperature: -50 to +70°C
• Weight: 3.20Kg
• KEMA Certificate number: 99ATEX6312
• The ring-tone circuit senses the ringing voltage on the telephone line and switches the supply onto signal until the telephone is answered.
  The sound can be continuous or follow the telephone ring (selectable option)

Installation Features

• Very large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Telephone line ringing voltage switches power (115vac or 230vac) to enable sounder to operate

E2S BExL15 & BExDL15 ATEX EEx 15 Watt Hazardous Area Loudspeakers

General Introduction

• SPL:
  102dB +/-3dB @ 1w @ 1m - Pink noise
  113dB +/-3dB @ 15w (Rated Power) @ 1m
• L15D: EEx d IIC T4 (Tamb. -50 to +55°C
• L15E: EEx de IIC T4 (Tamb. -50 to +55°C
• KEMA certified - ATEX/CENELEC/FTZU approved
• Suitable for Zone 1 & 2, Gas groups IIC, IIB & IIA
• Rated power: 15 Watts RMS
• 70v line transformer version: 15w/7.5w/3w/1w tappings
  (z=336.67 Ohms/653.33 Ohms/1.6k Ohms/4.9k Ohms)
• 100v line transformer version: 15w/7.5w/3w/1w tappings
  (z=666.87 Ohms/1.34k Ohms/3.34k Ohms/10k Ohms)
• Impedance type: 8 Ohm or 16 Ohm
• Dispersion: 120° @ 1kHz & 32° @ 4kHz
• Frequency range: 400Hz to 8000Hz
• DC line monitoring:
  2.2uF Capacitor (Transformer version)
  470uF Capacitor (Impedance version)
• L15D: IP67 L15E: IP66
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExL15 Horn: High impact UL94 V0 & 5VA FR ABS
• BExDL15 Horn: Anti-static High impact ABS
• Colour available: Red (RAL3000)
• Operating temperature: -50 to +50°C
• Storage temperature: -50 to +70°C
• Weight: 70/100v line: 3.45Kg Low impedance: 3.10Kg
• KEMA Certificate number: 99ATEX6312
• Loudspeaker third party tested - copy of report available on request

Installation Features

• Very large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cables

E2S BExL25 & BExDL25 ATEX EEx 25 Watt Hazardous Area Loudspeakers

General Introduction

• SPL:
  105dB +/-3dB @ 1w @ 1m - Pink noise
  117dB +/-3dB @ 25w (Rated Power) @ 1m
• L25D: EEx d IIC T4 (Tamb. -50 to +55°C
• L25E: EEx de IIC T4 (Tamb. -50 to +55°C
• KEMA certified - ATEX/CENELEC/FTZU approved
• Suitable for Zone 1 & 2, Gas groups IIC, IIB & IIA
• Rated power: 25 Watts RMS
• 70v line transformer version: 25w/12.5w/6w/2w tappings
  (z=196 Ohms/392 Ohms/816.67 Ohms/2.45k Ohms)
• 100v line transformer version: 25w/12.5w/6w/2w tappings
  (z=400 Ohms/800 Ohms/1.67k Ohms/5k Ohms)
• Impedance type: 8 Ohm or 16 Ohm
• Dispersion: 130° @ 1kHz & 32° @ 4kHz
• Frequency range: 300Hz to 8000Hz
• DC line monitoring:
  2.2uF Capacitor (Transformer version)
  470uF Capacitor (Impedance version)
• L25D: IP67 L25E: IP66
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExL25 Horn: High impact UL94 V0 & 5VA FR ABS
• BExDL25 Horn: Anti-static High impact ABS
• Colour available: Red (RAL3000)
• Operating temperature: -50 to +50°C
• Storage temperature: -50 to +70°C
• Weight: 70/100v line: 3.95Kg Low impedance: 3.56Kg
• KEMA Certificate number: 99ATEX6312
• Loudspeaker third party tested - copy of report available on request

Installation Features

• Very large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cables

E2S ML15 Marine Grade IP67 15 Watt Loudspeaker

General Introduction
A heavy duty high output IP67 sealed loudspeaker, ideal for harsh environments with high ambient noise levels.

• SPL:
  108dB +/-3dB @ 1w @ 1m - Pink noise
  118dB +/-3dB @ 15w (Rated Power) @ 1m
• Rated power: 15 Watts RMS
• 70v line transformer version: 15w/7.5w/3w/1w tappings
  (z=336.67 Ohms/653.33 Ohms/1.6k Ohms/4.9k Ohms)
• 100v line transformer version: 15w/7.5w/3w/1w tappings
  (z=666.87 Ohms/1.34k Ohms/3.34k Ohms/10k Ohms)
• Impedance type: 8 Ohm or 16 Ohm
• Dispersion: 120° @ 1kHz & 32° @ 4kHz
• Frequency range: 400Hz to 8000Hz
• DC line monitoring:
  2.2uF Capacitor Transformer type speaker
  470uF Capacitor Impedance type speaker
• Transformer type fitted with thermal fuse
• Complies with BS5839 part 8
• Third party tested to IP67 & IP66
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Grey (RAL7038)
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: 70/100v line: 2.60Kg Low impedance: 2.20Kg
• Large termination area
• 2 x M20 ISO cable gland entries (with 1 blanking plug)
• Ratchet adjustable stainless steel 'U' bracket for 360° positioning
• All units offer IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cables

E2S ML25 Marine Grade IP67 25 Watt Loudspeaker

General Introduction
A heavy duty high output IP67 sealed loudspeaker, ideal for harsh environments with high ambient noise levels.

• SPL:
  111dB +/-3dB @ 1w @ 1m - Pink noise
  121dB +/-3dB @ 15w (Rated Power) @ 1m
• Rated power: 25 Watts RMS
• 70v line transformer version: 25w/12.5w/6w/2w tappings
  (z=196 Ohms/392 Ohms/816.67 Ohms/2.45k Ohms)
• 100v line transformer version: 25w/12.5w/6w/2w tappings
  (z=400 Ohms/800 Ohms/1.67k Ohms/5k Ohms)
• Impedance type: 8 Ohm or 16 Ohm
• Dispersion: 130° @ 1kHz & 30° @ 4kHz
• Frequency range: 300Hz to 8000Hz
• DC line monitoring:
  2.2uF Capacitor Transformer type speaker
  470uF Capacitor Impedance type speaker
• Transformer type fitted with thermal fuse
• Complies with BS5839 part 8
• Third party tested to IP67 & IP66
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Grey (RAL7038)
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: 70/100v line: 3.00Kg Low impedance: 2.50Kg
• Large termination area
• 2 x M20 ISO cable gland entries (with 1 blanking plug)
• Ratchet adjustable stainless steel 'U' bracket for 360° positioning
• All units offer IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cables

E2S BExA110 & BExDA110 ATEX EEx Hazardous Area Voice Annunciation Unit

General Introduction
The sounder records, stores and plays back user defined messages stored directly to non-volatile memory without any intermediate analogue to digital conversion.

A single 16 second, message may be recorded and played back with a choice of 1 of 10 user selectable alarm tones (including silence to allow speech only option).

• Nominal output: 110dB(A) @ 1m +/-3dB - Tone 5
• A110D: EEx d IIC T4 (Tamb. -50 to +55°C)
• A110E: EEx de IIC T4 (Tamb. -50 to +55°C)
• KEMA certified - ATEX/CENELEC/FTZU approved
• 10 alarm tones (UKOOA/PFEER compliant)
• Edits automatically to message length
• Easy message creation with built in microphone
• Volume control
• 100m effective range @ 1kHz
• Voltages: 24vdc; 115vac; 230vac
• DC versions has reverse polarity protection
• A110D: IP67 A110E: IP66
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExA110 Horn: High impact UL94V0 & 5VA FR ABS
• BExDA110 Horn: Anti-Static High impact ABS
• Operating temperature: -50 to +55°C
• Storage temperature: -50 to +70°C
• Large range of certified end of line resistors
• Weight: DC: 3.20Kg AC: 3.40Kg
• KEMA Certificate number: 99ATEX6312

Installation Features

• Very large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN and OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Line monitoring: Min 500 Ohm 2w, 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)

E2S BExA120 & BExDA120 ATEX EEx Hazardous Area Voice Annunciation Unit

General Introduction
The sounder records, stores and plays back user defined messages stored directly to non-volatile memory without any intermediate analogue to digital conversion.

A single 16 second, message may be recorded and played back with a choice of 1 of 10 user selectable alarm tones (including silence to allow speech only option).

• Nominal output: 113dB(A) @ 1m +/-3dB - Tone 5
• A120D: EEx d IIC T4 (Tamb. -50 to +55°C)
• A120E: EEx de IIC T4 (Tamb. -50 to +55°C)
• KEMA certified - ATEX/CENELEC/FTZU approved
• 10 alarm tones (UKOOA/PFEER compliant)
• Edits automatically to message length
• Easy message creation with built in microphone
• Volume control
• 100m effective range @ 1kHz
• Voltages: 24vdc; 115vac; 230vac
• DC versions has reverse polarity protection
• A120D: IP67 A120E: IP66
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExA120 Horn: High impact UL94V0 & 5VA FR ABS
• BExDA120 Horn: Anti-Static High impact ABS
• Operating temperature: -50 to +55°C
• Storage temperature: -50 to +70°C
• Large range of certified end of line resistors
• Weight: DC: 3.20Kg AC: 3.40Kg
• KEMA Certificate number: 99ATEX6312

Installation Features

• Very large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN and OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Line monitoring: Min 500 Ohm 2w, 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)

E2S MV112 Marine Grade IP67 Voice Annunciation Unit

General Introduction
A heavy duty high output IP67 sealed voice annunciation sounder, ideal for harsh environments with high ambient.

The sounder records, stores and plays back user defined messages stored directly to non-volatile memory without any intermediate analogue to digital conversion.

A single 16 second, or two 8 second messages may be recorded and played back with a choice of 1 of 10 user selectable alarm tones.

• Maximum output: 110dB(A) @ 1 metre
  Voice output: approx. 105dB(A) @ 1m +/-3dB
• Direct message storage on silicon: 16 seconds of speech
• Very high voice reproduction quality (moving coil loudspeaker)
• 10 alarm tones (including silence to allow speech only option) UKOOA/PFEER compliant
• Volume control & tone duration control
• Message length: 1 x 16 seconds or 2 x 8 seconds
• 100m effective range @ 1kHz
• Voltages: 12vdc(9-15vdc); 24vdc(18-30vdc); 115vac; 230vac
• Easy message creation with built in microphone
• Edits automatically to message length
• Third party tested to IP67 & IP66
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Grey (RAL7038)
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 2.50Kg AC: 3.00Kg
• Large termination area
• 2 x M20 ISO cable gland entries (with 1 blanking plug)
• Ratchet adjustable stainless steel 'U' bracket for 360° positioning
• Terminals accept 0.5 to 4.0mm² cables

E2S A105N Appello P.I.R. Voice Annunciation Unit

General Introduction
Record & store a user defined 16 second voice message. Message is repeated whilst P.I.R. remains activated.

• Maximum output: 105dB(A) @ 1 metre
• Direct message storage on silicon: 16 seconds of speech
• Very high voice reproduction quality (moving coil loudspeaker)
• Volume control
• P.I.R. is in constant monitoring state - replays message upon activation
• 32m effective range @ 1kHz
• Voltages: 12vdc(9-15vdc); 24vdc(18-30vdc); 115vac; 230vac
• Easy message creation with built in microphone
• Edits automatically to message length
• DC versions have reverse polarity diode protection
• IP55 - can be increased to IP66 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 0.75Kg AC: 1.10Kg
• Cable gland knockouts in the rear of the unit
• Side M20 cable gland entry and IP55 stopping plug
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S A105N Appello Speech & Tone Voice Annunciation Unit

General Introduction
The sounder records, stores and plays back user defined messages stored directly to non-volatile memory without any intermediate analogue to digital conversion.

A single 16 second, or two 8 second messages may be recorded and played back with a choice of 1 of 10 user selectable alarm tones.

• Maximum output: 105dB(A) @ 1 metre
• Direct message storage on silicon: 16 seconds of speech
• Very high voice reproduction quality (moving coil loudspeaker)
• 10 alarm tones (including silence to allow speech only option) UKOOA/PFEER compliant
• Volume control & tone duration control
• Message length: 1 x 16 seconds or 2 x 8 seconds
• 32m effective range @ 1kHz
• Voltages: 12vdc(9-15vdc); 24vdc(18-30vdc); 115vac; 230vac
• Easy message creation with built in microphone
• Edits automatically to message length
• DC versions have reverse polarity diode protection
• IP55 - can be increased to IP66 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 0.75Kg AC: 1.00Kg
• Cable gland knockouts in the rear of the unit
• Side M20 cable gland entry and IP55 stopping plug
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S A105N Appello Synchronised Voice Annunciation Unit

General Introduction
The sounder is primarily intended for use in fire alarm and evacuation systems. It is fully synchronised with other units of the same type on the same circuit. It offers a three stage alarm facility enabling three verbal messages to be linked with 1 of 10 different tones for the 1st stage and 1 of 3 tones for the 2nd & 3rd stages. Three volume levels and an adjustment potentiometer are provided.

The unit is preprogrammed with three standard messages
1. "Please evacuate the building immediately"
2. "Alarm test, take no action"
3. "Alarm test now complete"
or an alternative message of your choice can be stated when ordering.

• Maximum output: 105dB(A) @ 1 metre - 3 sound levels selectable
• Direct message storage on silicon; no degradation in reproduction or standby power required
• Very high voice reproduction quality (moving coil loudspeaker)
• 14 alarm tones (10 for 1st stage) UKOOA/PFEER compliant
• 3 stage alarm option (3 different messages)
• Volume level settings
• Total message length: 16 seconds
• 32m effective range @ 1kHz
• Voltages: 24vdc(10-30vdc); 115vac; 230vac
• Automatic synchronisation on multi-sounder systems
• Edits automatically to message length
• DC versions have reverse polarity diode protection
• IP55 - can be increased to IP66 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 0.75Kg AC: 1.00Kg
• Cable gland knockouts in the rear of the unit
• Side M20 cable gland entry and IP55 stopping plug
• Unit can be mounted using external lugs or internal BESA compatible fixing positions
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S SON4 Sonora L.E.D. / Bulb Combination Alarm Sounder

General Introduction
A continuously rated compact combination sounder & beacon, ideal for fire and security applications.

• Nominal output: 100dB(A) @ 1m +/- 3dB, Tone 2
• 10 alarm tones
• 3 stage alarm option
• Volume control
• Automatic synchronisation on multi-sounder systems
• 32m effective range @ 1kHz
• L.E.D. beacon: 5 x high intensity L.E.D. @ 2Hz
• Bulb beacon: 1.3 watt filament bulb @ 1Hz
• Wide range of voltages available
• Reverse polarity switching on DC units
• Reverse polarity diode protection on DC units
• IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 0.30Kg AC: 0.40Kg
• 4 x gland knockouts in side & back
• Mounting via internal BESA compatible fixing positions
• AC units have external mounting lugs in addition to the above
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S SON4 Sonora Xenon Strobe Combination Alarm Sounder

General Introduction
A continuously rated compact combination sounder & beacon, ideal for fire and security applications.

• Maximum output 104dB(A) @ 1 metre
• Nominal output: 100dB(A) @ 1m +/-3dB, Tone 2
• 32 alarm tones
• 3 stage alarm option
• Volume control (3 levels)
• Automatic synchronisation on multi-sounder systems
• 32m effective range @ 1 kHz
• Voltages: 24vdc; 24vac; 115vac; 230vac
• Other voltages available upon request
• Reverse polarity switching on DC units
• Reverse polarity diode protection on DC units
• IP55 - can be increased to IP56 (dust protected, watertight) with WR kit
• Tropicalisation available on request
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Red (RAL3000), Grey or White
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 0.30Kg AC: 0.40Kg
• 4 x gland knockouts in side & back
• Mounting via internal BESA compatible fixing positions
• Units also have external mounting lugs in addition to the above
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 2.5mm² cables

E2S MCA112-05 Combined Marine IP67 Sounder & Beacon

General Introduction
A heavy duty high output IP67 sealed sounder & beacon, ideal for harsh environments with high ambient noise levels also requiring a visual indicator.

• Maximum output 119dB(A) @ 1 metre
• Nominal output: 112dB(A) @ 1m +/-3dB, Tone 2
• 45 alarm tones (UKOOA/PFEER compliant)
• 3 stage alarm option
• Volume control
• Automatic synchronisation on multi-sounder systems
• 125m effective range @ 1 kHz
• Beacon: 5 Joule @ 1Hz (5Ws)
• Automatic synchronised flash, or Flip-Flop alternating mode
• 6 lens colours available
• Xenon tube mechanically secured against vibration/shock
• Voltages: 12vdc; 24vdc; 48vdc; 24vac; 115vac; 230vac
• Other voltages available upon request
• 24vdc versions may be used on 24vac +/-10% for single stage applications
• Positive stage switching DC version available
• Reverse polarity switching on DC units
• Fully programmable version with 4 stages available
• Third party tested to IP67 & IP66
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Grey (RAL7038)
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 3.00Kg AC: 3.50Kg
• Large termination area
• 2 x M20 ISO cable gland entries (with 1 blanking plug)
• Ratchet adjustable stainless steel 'U' bracket for 360° positioning
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Sounder & beacon may use same supply for simultaneous operation or seperate supplies for independent operation

E2S MCV112-05 Marine Grade IP67 Voice Annunciation & Beacon

General Introduction
A heavy duty high output IP67 sealed voice annunciator & beacon, ideal for harsh environments with high ambient noise levels also requiring a visual indicator.

• Maximum output 110dB(A) @ 1 metre
  Voice output: approx. 105dB(A) @ 1m +/-3dB
• Direct message storage on silicon: 16 seconds of speech
• Very high voice reproduction quality (moving coil loudspeaker)
• 10 alarm tones (including silence to allow speech only option) UKOOAV/PFEER compliant
• Volume control & tone duration control
• Message length: 1 x 16 seconds or 2 x 8 seconds
• 100m effective range @ 1 kHz
• Voltages: 12vdc(9-5vdc); 24vdc(18-30vdc); 115vac; 230vac
• Easy message creation with built in microphone
• Edits automatically to message length
• Third party tested to IP67 & IP66
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Grey (RAL7038)
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: DC: 2.50Kg AC: 3.00Kg
• Beacon: 5 Joule @ 1Hz (5 Ws)
• Automatic synchronised flash, or Flip-Flop alternating mode
• 6 lens colours available
• Xenon tube mechanically secured against vibration/shock
• Large termination area
• 2 x M20 ISO Cable gland entries (with 1 blanking plug)
• Ratchet adjustable stainless steel 'U' bracket for 360° positioning
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Sounder & beacon may use same supply for simultaneous operation or seperate supplies for independent operation

E2S MCL15-05 Marine Grade IP67 15w Loudspeaker & Xenon Beacon

General Introduction
A heavy duty high output IP67 sealed loudspeaker & beacon, ideal for harsh environments with high ambient noise levels also requiring a visual indicator.

• Third party tested to IP67 & IP66
• Enclosure material: UL94V0 & 5VA rated FR ABS
• Colour available: Grey (RAL7038)
• Operating temperature: -25 to +55°C
• Storage temperature: -40 to +70°C
• Relative humidity: 90% at 20°C
• Weight: 70/100v line : 2.60Kg
  Low inpedance: 2.20Kg
• Large termination area
• 2 x M20 ISO Cable gland entries (with 1 blanking plug)
• Ratchet adjustable stainless steel 'U' bracket for 360° positioning
• All units offer IN and OUT terminals
• Terminals accept 0.5 to 4.0mm² cables

Loudspeaker

• SPL:
  108dB +/-3dB @ 1w @ 1m - Pink noise
  118dB +/-3dB @ 15w (Rated Power) @ 1m
• Rated power: 15 Watts RMS
• 70v line transformer version: 25w/12.5w/6w/2w tappings
  (z=196 Ohms/392 Ohms/816.67 Ohms/2.45k Ohms)
• 100v line transformer version: 25w/12.5w/6w/2w tappings
  (z=400 Ohms/800 Ohms/1.67k Ohms/5k Ohms)
• Impedance type: 8 Ohm or 16 Ohm
• Dispersion: 120° @ 1kHz & 32° @ 4kHz
• Frequency range: 400Hz to 8000Hz
• DC line monitoring:
  2.2uF Capacitor Transformer type speaker
  470uF Capacitor Impedance type speaker
• Transformer type fitted with thermal fuse
• Complies with BS5839 part 8

Beacon

• Beacon: 5 Joule @ 1Hz (5 Ws)
• Automatic synchronised flash, or Flip-Flop alternating mode
• 6 lens colours available
• Beacon voltage: 12vdc; 24vdc; 48vdc; 115vac; 230vac
• DC versions have reverse polarity protection
• Xenon tube mechanically secured against vibration/shock

E2S BExCA110-05D & BExDCA110-05D ATEX EEx Combined Voice Sounder & Beacon

General Introduction
The sounder records, stores and plays back user defined messages stored directly to non-volatile memory without any intermediate analogue to digital conversion.

A single 16 second, message may be recorded and played back with a choice of 1 of 10 user selectable alarm tones (including silence to allow speech only)

• CA110-05D: EEx d IIB T4 (Tamb. -50 to +55°C)
• KEMA certified - ATEX/CENELEC approved
• Voltages: 24vdc; 115vac; 230vac
• CA110-05D: IP67
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExCA110-05D Horn: High impact UL94 V0 & 5VA FR ABS
• BExDCA110-05D Horn: Anti-Static High impact ABS
• Colour available: Red (RAL3000)
• Operating temperature: -50 to +55°C
• Storage temperature: -50 to +70°C
• Large range of certified end of line resistors
• Weight: DC: 4.80Kg AC: 5.00Kg
• KEMA Certificate number: 01ATEX2223

Sounder

• Nominal output: 110dB(A) @ 1m +/-3dB, Tone 5
• 10 alarm tones (including silence to allow speech only option) UKOOA/PFEER compliant
• Edits automatically to message length
• Easy message creation with built in microphone
• Volume control
• DC versions have reverse polarity protection
• 100m effective range @ 1 kHz
• Negative or positive remote switching

Beacon

• 5 Joule @ 1Hz (60 FPM)(5Ws)
• Automatic synchronisation on multi-beacon systems
• Beacons can be set to 'flip-flop' alternating mode with other units on multi-beacon systems
• 6 lens colours available: Amber, Blue, Clear, Green, Red & Yellow
• Tube life: emissions reduced to 70% after 8 million flashes
• Xenon tube mechanically secured against vibration/shock

Installation Features

• Large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Line monitoring: Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)
• Sounder & beacon may be connected from a single supply for simultaneous operation or from seperate supplies for independent operation

E2S BExCS110-05D & BExDCS110-05D ATEX EEx Combined Alarm Sounder & Beacon

General Introduction

• CS110-05D: EEx d IIB T4 (Tamb. -50 to +55°C)
• KEMA certified - ATEX/CENELEC approved
• Voltages: 12vdc; 24vdc; 48vdc; 115vac; 230vac
• CS110-05D: IP67
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish - good resistance to humidity and salt spray environments
• BExCS110-05D Horn: High impact UL94 V0 & 5VA FR ABS
• BExDCS110-05D Horn: Anti-Static High impact ABS
• Operating temperature: -50 to +55°C
• Storage temperature: -50 to +70°C
• Large range of certified end of line resistors
• Weight: DC: 4.80Kg AC: 5.00Kg
• KEMA Certificate number: 01ATEX2223

Sounder

• Maximum output: 117dB(A) @ 1 metre
  Nominal output: 110dB(A) @ 1m +/-3dB, Tone 2
• 32 alarm tones (UKOOA/PFEER compliant)
• 3 stage alarm
• Volume control
• Automatic synchronisation on multi-sounder systems
• 100m effective range @ 1 kHz
• Negative or positive remote switching

Beacon

• 5 Joule Xenon: 1Hz (60 FPM)(5Ws)
• Automatic synchronisation on multi-beacon systems
• Beacons can be set to 'flip-flop' alternating mode with other units on multi-beacon systems
• 6 lens colours available: Amber, Blue, Clear, Green, Red & Yellow
• Tube life: emissions reduced to 70% after 8 million flashes
• Xenon tube mechanically secured against vibration/shock

Installation Features

• Very large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Line monitoring: Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)
• Sounder & beacon may be connected from a single supply for simultaneous operation or from seperate supplies for independent operation

E2S BExCL15-05D & BExDCL15-05D ATEX EEx Combined Loudspeaker & Beacon

General Introduction

• CL15-05D: EEx d IIB T4 (Tamb. -50 to +55°C)
• KEMA certified - ATEX/CENELEC approved
• CS110-05D: IP67
• Enclosure material: Marine grade LM6 Aluminium
• Chromated & powder coated finish for harsh environments
• BExCL15-05D Horn: High impact UL94 V0 & 5VA FR ABS
• BExDCL15-05D Horn: Anti-Static High impact ABS
• Colour available: Red (RAL3000)
• Operating temperature: -50 to +55°C
• Storage temperature: -50 to +70°C
• Large range of certified end of line resistors
• Weight: 5.00Kg
• KEMA Certificate number: 01ATEX2223

Loudspeaker

• SPL:
  102dB +/-3dB @ 1w @ 1m - Pink noise
  113dB +/-3dB @ 15w (Rated Power) @ 1m
• 70v line transformer: 15w/7.5w/3w/1w tappings
  (z=336.67 Ohms/653.33 Ohms/1.6k Ohms/4.9k Ohms)
• 100v line transformer: 15w/7.5w/3w/1w tappings
  (z=666.87 Ohms/1.34k Ohms/3.34k Ohms/10k Ohms)
• Impedance version: 8 Ohm or 16 Ohm
• Dispersion: 120° @ 1kHz & 32° @ 4kHz
• Frequency range: 400Hz to 8000Hz
• DC line monitoring:
  2.2uF Capacitor (Transformer version)
  470uF Capacitor (Impedance version)

Beacon

• 5 Joule @ 1Hz (60 FPM)(5Ws)
• Voltages: 12vdc; 24vdc; 48vdc; 115vac; 230vac
• 6 lens colours: Amber, Blue, Clear, Green, Red & Yellow
• Automatic synchronisation on multi-beacon systems
• Beacons can be set to 'flip-flop' alternating mode with other units on multi-beacon systems
• Tube life: emissions reduced to 70% after 8 million flashes
• Xenon tube mechanically secured against vibration/shock

Installation Features

• Large termination area
• Dual M20 ISO cable gland entries (supplied with one stopping plug)
• Ratchet adjustable stainless steel 'U' bracket for positive adjustment under harsh conditions
• IN & OUT terminals
• Terminals accept 0.5 to 4.0mm² cables
• Line monitoring: Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor, or diode within EExd enclosure (dc versions)
• Loudspeaker component third party tested

Gentex Photoelectric Smoke Alarm

General Introduction
Photoelectric Smoke Alarm For 120VAC and 220VAC Single or Multiple (Tandem) Station and Specialty Application.

Designed for single station, tandem and specialty applications in homes, commercial residential occupancies, apartments, hospitals and hotels in compliance with UL 217, UL1730 and NFPA 101 (7-6.2.9) occupancies. Exclusive, patented 3-position test switch simulates .85% and 3.4% smoke conditions per NFPA 72 Chapter 7, UL 217 and UL 1730 standards.

• 120VAC and 220VAC models available
• Patented, three-position test switch
• Includes 90 dB piezo solid state non-latching horn
• Nominal 2.5% sensitivity
• 5:1 signal-to-noise ratio
• Solid State LED condition indicator
• Quick-disconnect wiring harness
• Mounting hardware adapts to standard junction boxes
• Protective high air velocity gasket
• On-site maintenance washing program
• 1 year warranty from date of purchase
• Temporal 3 Evacuation Sounding Device (7003)

MEDC DB1 Range Sounders

General Introduction
This range of light weight, flameproof Sounders has been designed with a high weatherproof rating to cope with the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries.

New electronic circuitry allows the DB1P and DB1HP to be switched between two selectable tones by either reversing the supply polarity, or connecting a second voltage supply.

The higher output DB1H and DB1HP are particularly suitable for noisy environments.

• Zone 1 and Zone 2 use
• EExd, IIB T3
• ATEX approved, Ex II 2G
• CENELEC approved, BASEEFA certified
• UL Listed - Class I, Div 1. Groups C & D
• GOST 'R' certified
• Australian (SAA) certified
• IP66
• Certified temperature -20°C to +70°C
• Up to 113 dBA output
• Available in marine grade alloy or stainless steel
• 6 or 27 output tones, user selectable
• Telephone initiate option
• Tones can be selected remotely
• Tones comply with UKOOA/PFEER guidelines
• Any two tones may be switched via the external voltage supply
• End of line resistor option

MEDC DB3 Range Sounders

General Introduction
This range of light weight all GRP, flameproof sounders is intended for use in potentially explosive gas and dust atmospheres and has been designed with high ingress protection to cope with the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries.

The flamepaths, flare and the body, are manufactured completely from a UV stable glass reinforced polyester. Stainless steel screws and sinter are incorporated thus ensuring a corrosion free product. A tapered flamepath is used to overcome the problems of assembly of parallel spigot flamepaths.

An optional Exe terminal chamber is available. An uncertified version is available for use in non-explosive atmospheres.

• Zone 1, Zone 2 and non-Ex use
• EExde IIC T5
• ATEX approved, Ex II 2GD
• Optional Exe terminal chamber
• BASEEFA certified
• UL Listed for USA and Canada
  - Hazardous locations:
  Class I, Div 2, Groups A-D
  Class I, Zones 1 & 2, AExd IIC T4
  - Ordinary locations: Audible-Signal Device
• GOST 'R' & 'K' certified
• Chinese (CQST) certified
• Australian (SAA) certified
• IP66 and IP67
• *Certified temperature -55°C to +70°C
• All GRP corrosion free flamepaths
• Up to 118dBA output
• Integral volume control
• 27 tones, user selectable
• Tones comply with UK00A/PFEER guidelines
• Any two tones may be switched via the external voltage supply
• Tones may be programmed to customer specification
• d.c. version accepts any voltage between12V d.c. and 48V d.c.
• End of line resistor option
• Sounder/Beacon Combination Unit available

*Depending on version.

MEDC DB3V Range Sounders

General Introduction
This range of light weight all GRP, flameproof voice sounders is intended for use in potentially explosive gas and dust atmospheres and has been designed with high ingress protection to cope with the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries.

The flamepaths, flare and the body, are manufactured completely from a UV stable glass reinforced polyester. Stainless steel screws and sinter are incorporated thus ensuring a corrosion free product. A tapered flamepath is used to overcome the problems of assembly of parallel spigot flamepaths.

This unit offers up to 20 seconds of speech which can be recorded via an integral microphone or an input from an external source. The unit incorporates a variable delay allowing speech to be repeated at equal intervals of up to approximately 15 seconds.

In addition, a 'mechanical bell' sound version is available.

An optional Exe terminal chamber is available.

An uncertified version is available for use in non-explosive atmospheres.

• Zone 1, Zone 2 and non-Ex use
• EExde IIC T5
• ATEX approved, Ex II 2GD
• Optional Exe terminal chamber
• BASEEFA certified
• GOST 'R' & 'K' certified
• Chinese (CQST) certified
• IP66 and IP67
• *Certified temperature -55°C to +70°C
• All GRP corrosion free flamepaths
• Up to 110dBA output
• Integral volume control
• d.c. version accepts any voltage between 12V d.c. and 48V d.c.
• End of line resistor option
• Sounder/Beacon Combination Unit available
• Bell recording version available

*Depending on version.

MEDC DB5 Range Sounders

General Introduction
This range of light weight, intrinsically safe Sounders has been designed with a high weatherproof rating to cope with the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries.

The unit is available in 2 models: 12V and 24V.

• Zone 0, Zone 1 and Zone 2 use
• EExia T4
• ATEX approved Ex II 1G & Ex 1 M1
• BASEEFA certified
• FM Approved - Class I, Div. 1, Groups A-D
• CSA certified
• IP65
• Certified temperature -20°C to +55°C
• Volume control as standard
• Up to 103 dB(A)
• 26 different sound outputs, user selectable by internal switches
• Encapsulated electronics
• Second tone selectable using third wire

MEDC DB6 Range Sounders

General Introduction
This explosionproof bell is available in two voltages. The bell is manufactured from cast iron finished in epoxy paint. Colour to customer's specification.

• Zone 1 and Zone 2 use
• EExd IIB T5
• ATEX approved Ex II 2G
• BASEEFA certified
• IP65
• Certified temperature -20°C to +55°C
• 2 cable entries
• Proven track record
• Captive cover screws

MEDC DB7 Range Sounders

General Introduction
This range of ruggedised, intrinsically safe and weatherproof sounders, intended for use in potentially explosive atmospheres, has been designed with high ingress protection to cope with the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries.

The unit is available in 12V and 24V versions and for gas groups IIB or IIC.

A lower cost, uncertified version is available for use in non-explosive atmospheres.

• Zones 0, 1, 2 and safe area use
• EExia IIB/IIC T4
• ATEX approved Ex II 1G
• Weatherproof uncertified version
• BASEEFA certified
• GOST 'R' certified
• IP66 & IP67
• Certified temperature -55°C to +70°C
• Corrosion resistant red GRP
• Up to 110 dBA output
• 27 tones, user selectable
• Tones comply with UKOOA/PFEER guidelines
• Any two tones may be switched by the external voltage supply
• Retained stainless steel cover screws

MEDC DB12 Range sounders

General Introduction
This range of sounders has been specially designed for use in demanding industrial and marine environments where a robust construction and high ingress protection rating is required.

The body is manufactured completely from a UV stable glass reinforced polyester which is also highly flame retardant and impact resistant. Stainless steel screws are incorporated thus ensuring a corrosion free product.

• IP66 & IP67
• Operating temperature -55°C to +70°C
• Corrosion resistant red GRP
• Up to 110 dBA output
• 27 tones, user selectable
• Tones comply with UKOOA/PFEER guidelines
• Any two tones may be switched by the external voltage supply (d.c. version)
• Retained stainless steel cover screws
• Available compliant to AFNOR NF S 32 001

MEDC DB15 Range Sounders

General Introduction
This range of sounders have been specially designed for use in demanding industrial and marine environments where a robust construction and high ingress protection rating is required.

The body is manufactured completely from a UV stable glass reinforced polyester which is also highly flame retardant and impact resistant. Stainless steel screws are incorporated thus ensuring a corrosion free product.

• IP66 and IP67
• Temperature range -55°C to +70°C
• GRP corrosion-free construction
• Up to 117dB(A) output
• 27 user selectable tones
• Tones may be programmed to customer's specification
• Stainless steel ratcheted mounting bracket
• Earth continuity available
• Natural grey finish to RAL 7035
• Paint finish to customer requirement
• Available compliant to AFNOR NF S 32 001

MEDC DB4 Range Speakers

General Introduction
This range of loudspeakers, intended for use in potentially explosive gas and dust atmospheres, has a power rating of up to 25 watts and is suitable for use in all gas groups including hydrogen.

The flamepaths, flare and the body, are manufactured completely from a UV stable glass reinforced polyester. Stainless steel screws and sinter are incorporated thus ensuring a corrosion free product. A tapered flamepath is used to overcome the problems of assembly of parallel spigot flamepaths.

An optional Exe terminal chamber is available.

An uncertified version is available for use in non-explosive atmospheres.

Models compliant to BS 5839, part 8 are available.

• Zone 1, Zone 2 & non-Ex use
• EExd IIC T4/T5
• ATEX approved, Ex II 2GD
• BASEEFA certified
• UL listed for USA and Canada:
  - Class I, Div 2, Groups A-D
  - Class I, Zones 1 & 2, AExd IIC, T4
• GOST 'R' & 'K' certified
• Australian (SAA) certified
• Optional Exe terminal chamber
• IP66 and IP67
• *Certified temperature -55°C to +70°C
• GRP corrosion-free flamepaths
• 119dBA at 25 watts at 1 metre
• 8, 15, 20 and 25 watt versions
• BS 5839, part 8 compliant versions available
• Addressable capability
• Power tappings, via integral transformer
• Ratcheted swivel bracket
• Stainless steel sinter
• Stainless steel mounting bracket
• Tapered flamepath

*Depending on version.

MEDC DB10 Range Speakers

General Introduction
This range of loudspeakers, intended for use in potentially explosive gas atmospheres, has a power rating of up to 15 Watts and is suitable for use in gas groups IIB and hydrogen.

The flamepaths, flare and body, are manufactured from a UV stable glass reinforced polyester. Stainless steel screws and mounting stirrup are incorporated to ensure a corrosion-free product.

• Zone 1, Zone 2 & non-Ex use
• EExde IIB + H2 T4/T5/T6
• ATEX approved, Ex II 2G
• BASEEFA certified
• GOST 'R' certified
• Chinese (CQST) certified
• IP66 and IP67
• Certified temperature -55°C to +70°C
• GRP corrosion-free flamepath
• 115dBA at 15 Watts at 1 metre
• 8 and 15 Watt versions
• Power tappings via integral transformer
• Ratcheted swivel mounting stirrup
• Stainless steel fixtures
• Earth continuity available

MEDC DB14 Range Speakers

General Introduction
This range of loudspeakers has a power rating of 15 Watts and is suitable for use in demanding environments where a robust construction and high ingress protection rating is required.

The body is manufactured completely from a UV stable glass reinforced polyester which is also highly flame retardant and impact resistant. Stainless steel screws are incorporated thus ensuring a corrosion free product.

• IP66 and IP67
• Temperature range -55°C to +70°C
• GRP corrosion-free construction
• 117dBA at 15 watts at 1 metre
• 100V line transformer
• Power tappings, via integral transformer
• Addressable capability
• Stainless steel ratcheted mounting bracket
• Earth continuity available
• Natural grey finish to RAL 7035
• BS5839 part 8 compliant version available

MEDC DB16 Range Speakers

General Introduction
This range of loudspeakers, intended for use in potentially explosive gas and dust atmospheres, has a power rating of up to 30 Watts and is suitable for use in the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries.

With an integral increased safety chamber, for termination, this unit offers both high output and easy installation.

In addition, the 25 Watt version still offers superior output with a higher ambient certified temperature (+65°C).

The flamepaths, flare and body, are manufactured from a UV stable glass reinforced polyester. Stainless steel screws and mounting stirrup are incorporated to ensure a corrosion-free product.

• Zone 1, Zone 2 & non-Ex use
• EExde IIB/IIC, T3/T4*
• ATEX approved, Ex II 2G/Ex II 2GD*
• BASEEFA certified
• UL listed for USA and Canada
  - Hazardous locations:
  Class I, Div 2, Groups A-D*
  Class I, Zone 1, AExde IIB/IIC T3/T4*
  - Ordinary locations: Signalling Speaker
• IP66 and IP67
• Certified temperature -50°C to +65°C*
• GRP corrosion-free flamepath
• Up to 122dBA at 30 Watts at 1 metre*
• 25 and 30 Watt versions
• Power tappings via integral transformer
• Ratcheted swivel mounting stirrup
• Stainless steel fixtures
• 100V line or 8 ohm versions available

*Model dependent.

MEDC DB18 Range Speakers

General Introduction
This loudspeaker, intended for use in Zone 2, potentially explosive gas and dust atmospheres, has a power rating of up to 15 Watts and is suitable for use in all gas groups including hydrogen.

The flare and body are manufactured from a UV stable glass reinforced polyester. Stainless steel screws and mounting stirrup are incorporated to ensure a corrosion-free product.

• Zone 2 use
• EEx n II T4
• ATEX compliant, Ex II 3 GD
• BASEEFA tested
• IP66 & 67
• Ambient temperature -55°C to +55°C
• 117dbA at 15 Watts at 1 metre
• Power tappings via integral transformer
• Stainless steel ratcheted swivel mounting stirrup
• Stainless steel fixtures

MEDC DB19 Range Speakers

General Introduction
This music quality projector loudspeaker, intended for use in Zone 2, potentially explosive gas and dust atmospheres, has a power rating of up to 15 Watts and is suitable for use in all gas groups including hydrogen.

Designed for optimum sound reproduction, this rugged loudspeaker is ideal for PA and background music systems in industrial and commercial environments.

The body is manufactured in aluminium and powder coat finished to RAL 9010. Stainless steel screws and mounting stirrup are incorporated to ensure a corrosion-resistant product.

• Zone 2 use
• EEx n II T4
• ATEX compliant, Ex II 3 GD
• BASEEFA tested
• IP54
• Ambient temperature -55°C to +55°C
• 104dbA at 15 Watts at 1 metre
• Power tappings via integral transformer
• Stainless steel mounting stirrup
• Aluminium body
• 100V line or 8O versions

Vimpex Banshee^MT Sounders

General Introduction
The MT Range of Multi-Tone sounders represents the most modern, acoustically advanced and by far the most flexible range of conventional electronic sounders and combined sounder/strobes available on the market today.

The Banshee^MT comes with 32 user-selectable tones incorporating low frequencies, high frequencies, European, American and Australian norms and all industry standard frequency patterns. Tested and approved to EN 54 Part 3, the Banshee^MT boasts leading acoustics, modern curves and low power consumption.

• Industry leading sounder with enhanced aesthetics
• 32 user-selectable tones - industry standard compatible
• EN 54 part 3 tested and compliant
• LPCB and VdS approved
• Simple push and twist bayonet mounting with locking screw
• Easy to install with side and rear cable entry
• Robust 'two in two out' 2.5mm terminals
• Choice of three volume levels
• Very low current consumption
• Extensive series of accessories for a wide range of applications

Vimpex Wafer ^MT Sounders

General Introduction
The MT Range of Multi-Tone sounders represents the most modern, acoustically advanced and by far the most flexible range of conventional electronic sounders and combined sounder/strobes available on the market today.

The Wafer ^MT comes with 32 user-selectable tones incorporating low frequencies, high frequencies, European, American and Australian norms and all industry standard frequency patterns. Tested and approved to EN 54 Part 3, the Banshee^MT boasts leading acoustics, modern curves and low power consumption.

The Wafer^MT is the thinnest platform sounder on the market and is renowned for its 360° sound dispersal.

• 32 tones designed to be compatible with Banshee^MT
• Slimmest profile in the industry
• Colours matched to leading detectors
• Omni-directional sound
• Low current consumption
• Choice of three volume levels
• Installer friendly terminals
• Suitable for ceiling or wall mounting
• Front plate for stand-alone use available
• Robust and easily connected 'two in two out' 2.5mm terminals
• Supplied with fixing screws

Vimpex FlashTone ^MT Sounders

General Introduction
The MT Range of Multi-Tone sounders represents the most modern, acoustically advanced and by far the most flexible range of conventional electronic sounders and combined sounder/strobes available on the market today.

The FlashTone^MT comes with 32 user-selectable tones incorporating low frequencies, high frequencies, European, American and Australian norms and all industry standard frequency patterns. Tested and approved to EN 54 Part 3, the Banshee^MT boasts leading acoustics, modern curves and low power consumption.

The FlashTone^MT combines the modern aesthetics of the Banshee^MT multi-tone sounder and the very latest strobe technology to create an extremely efficient strobe/sounder combination.

Available in a wide choice of lens colours, the FlashTone^MT will suit the majority of fire and security needs where conventional sound requires the back-up of a visual alarm.

• Low power consumption
• Easily installed
• Deep base available to IP66
• Wide range of lens colour options
• Modern aesthetic design
• Incorporates all features and tones of the Banshee^MT

Firex Smoke Alarm

General Introduction
The Firex 461, 462, and 465 smoke alarms are ionization 9V battery powered smoke alarms. These units have an 85 decibel horn, test switch, low battery signal, and a lighted power/alarm LED indicator (except 461); the LED flashes once per minute indicating it is receiving power. When in alarm, the LED flashes rapidly once per second.

• 461 Basic Protection
• 462 Blinking LED power-on indicator
• 465 False Alarm Control™ to quiet unwanted alarms

Firex DC ionization smoke alarms provide contractors and homeowners with the reliable and troublefree performance they expect from Firex... the market leader in fire safety products. With installerfocused innovations such as "positive snap" battery connection to ensure proper battery installation, separate mounting bracket, and battery "lockout" to prevent detector from being mounted without a battery, Firex DC ionization smoke alarms have earned their reputation as the most preferred smoke alarms among contractors.

Firex Photoelectric Smoke Alarm

General Introduction
The Firex 480, 484, and 4480 are photoelectric smoke alarms. These units have an 85 decibel horn, test switch, and lighted power/alarm LED indicators. The 4480 and 484 AC smoke alarms can be interconnected with Firex ionization as well as photoelectric smoke alarms for the best smoke detection system.

These Firex smoke alarms should be placed in single-family households or in each individual living unit of multiple-family buildings. All smoke alarms should be replaced every 10 years.

• 4480: 120V AC Direct Wire with Battery Back-up for single or multiple station use. The 4480
  is interconnectable up to 12 Firex AC/DC smoke alarms and 6 Firex heat alarms for a total of not more than 18 Firex devices. This unit has two separate lighted LEDS - green "poweron" LED confirms constant AC power and the red LED displays alarm/battery status.
• 484: 120V AC Direct Wire for single or multiple station use. The 484 is interconnectable up to 12 Firex AC smoke alarms. A green lighted LED "blinks" once per minute to confirm constant AC power and once per second when in alarm.
• 480: 9V DC Battery Powered with a green lighted LED that "blinks" once per minute to confirm DC power and once per second in alarm. Includes a 30 day low battery indicator and tamper resistant locking device.

Firex photoelectric smoke alarms respond to slow burning, visible smoke caused by smoldering fires. Designed for use in kitchens and furnace rooms, they reduce nuisance alarms caused by cooking fumes or high humidity. With installer focused innovations such as gasketless mounting, separate mounting bracket as well as state-of-the-art production testing equipment, Firex photoelectric smoke alarms have earned their reputation as the most preferred smoke alarms among contractors.

C&S Carillon Multi-Purpose Sounder

General Introduction
A versatile, compact solid state electronic sounder designed for fire, security and hazard warnings.

• 10 to 35vdc operation
• Choice of sound signals
• Up to 104dB(A) at 1 metre output
• Low current consumption
• 2 stage alarm by 3 wire control
• Complies with BS 5839 Part 1: 1980
• IP65

C&S Explosion Proof Audible & Visual Alarms

General Introduction

• Omni Directional high output 110dB at 1m
• Unique product combinations
• Reduce installation costs
• Reduced meets universal approval
• Low current devices
• Dual cable entry - cable in / cable out
• User selectable tones (32) to meet international regulations

C&S Y07D Explosion Proof Audible Alarms

General Introduction

• High Output
• BASEEFA approved
• Monitoring Facility
• Rugged Construction
• Compact one piece design
• Dual cable entry
• Complies with BS5839 pt 1 : 1980
• Meets PFEER & UKOOA requirements
• Choice of 32 signals

C&S YL4 Sounder / Strobe Combination

General Introduction

• 12 or 24vdc operation
• Choice of 11 sound signals
• Up to 108dB(A) outpur at 1 metre
• Low current consumption
• 2 stage alarm by 3 wire control
• Choice of 0.3, 2.5 and 5 joule (24vdc only) flash output
• Opal, amber, red, green or blue lens options
• Flame retardant version available
• IP65

C & S Y04 Sounder

General Introduction
There are two ranges of sounders approved as intrinsically safe, one meeting the Euorpean standards and the second the United States UL standards. Three sizes of enclosure are available all made from retardent ABS plastic.

• 10 to 35vdc operation
• Choice of 11 sound signals
• Up to 108dB(A) at 1 metre output
• Low current consumption
• 2 stage alarm by 3 wire control
• Complies with BS 5839 part 1 : 1980
• Intrinsically safe versions available
• Flame retardant versions available
• IP65

C & S Y04 Quad Alarm Sounder

General Introduction

• 10 to 30vdc operation
• Up to 96 dB(A) at 1 metre
• Low current consumption
• Complies with BS 5839 part 1 : 1980
• Red or white high impact ABS body
• Flush mounting base available
• Choice of 4 sound signals
• IP54

C & S Yodalarm Sounder & Yodalight Sounder / Strobe Multi Option

General Introduction

• D.C. and A.C. types standard supply voltages covered by 3 varieties
• 11 sound signals
• Complies with BS 5839; Pt. 1: 1980 Clause 9.5
• 2-stage alarms
• 3-wire polarised or 2-wire bi-polar d.c. second stage control on all types
• 3-wire a.c. second stage control on Y05, YL5 and YO3 types
• Choice of lens colour (except YO3)